Button Settings not working

[KE0TOT]

Just got a new radio that shipped with 909E.DBB.EARSAB.019

The Button settings in the CPEditor aren't working. Clicking on the drop-down to edit doesn't list any other options. Also the numbering is off (it shows the mic buttons as P5-P8).

Thanks for the hard work on this editor, it's clearly an improvement. Just having the ability to import/export is a gamechanger vs the factory software. Send a donation!

[MM7DBT]

Yeah it's a known issue in the current release but unfortunately my pc is down for now for some room decorating
So its likely to be January before I'm able to get an update out.

I haven't had the chance either to replicate the issue so unsure what exactly is happening.

I believe there's ways around it by loading a codeplug or starting a new one to get the button options to show up.

Button parameters are slightly different between radios as some options are not available on all models. So the list is loaded based on the radio model detected. I guess that's it's not detecting the model correctly.

[K9XT]

Same issue here. I was able to overcome the problem by loading CPEditor 0.5.0914.1.

With the current release, button settings worked when a "new" blank CP was loaded. It did not work when a working CP was loaded.

[uncleelie]

I just wanted to add that button setting doesn't work for me either.

[K9SWE]

Same issue here. I was able to overcome the problem by loading CPEditor 0.5.0914.1.

Where can one download that version?

[MM7DBT]

I found the issue.. The radio model wasn't being set correctly when reading from the radio.. only when opening a codeplug.

Updated the code to set the model correctly.. just waiting to push an update once other bugs are also solved