I will have to assume you received this error when you attempted the write to the radio.
Did you save the .json file of what you created?
If so, attach it as a file in a comment.
Create New CP
-
bwQuestion
- Posts: 26
- Joined: Mon May 22, 2023 3:45 am
- Callsign: K5KRZ
-
bwQuestion
- Posts: 26
- Joined: Mon May 22, 2023 3:45 am
- Callsign: K5KRZ
Re: Create New CP
Also, make sure you have the most recent version of this software and make sure your radio has the most recent firmware. It seems this error is similar to one a short time back that was related to the software. In the other post the author mentioned he had fixed it. Could be the same thing.
-
bwQuestion
- Posts: 26
- Joined: Mon May 22, 2023 3:45 am
- Callsign: K5KRZ
Re: Create New CP
Ok. So you have connected your radio and can read from the radio using the Read From Radio option.
You click the Import/Export menu option and then click the Repeater Finder option and the new window opens.
You locate some repeaters in the new window, click the check box on the left for the ones you want, type the name for the new zone, then when you click Add Selected Repeaters button you receive the error?
You click the Import/Export menu option and then click the Repeater Finder option and the new window opens.
You locate some repeaters in the new window, click the check box on the left for the ones you want, type the name for the new zone, then when you click Add Selected Repeaters button you receive the error?
You do not have the required permissions to view the files attached to this post.